Here at Wood Splitters Direct we are dealers for several manufactures. We have seen a lot of splitters and we have been approached by several manufactures over the years. It is in our opinion that Iron & Oak log splitters are superior to any other log splitter we carry, as well as on the market today. When shopping for a log splitter remember "cheaper isn't always best". There are several things to look for when buying a log splitter. If you need any help at all choosing a splitter please don't hesitate ask. You will receive ZERO sales pressure, that's a promise!
Please note: Not all log splitters in this store are made by Iron & Oak. Here you can find some broke down by tonnage, If it does not say "Iron & Oak" in the title it's not an Iron & Oak:
We also sell Iron & Oak 3 point log splitters .
Quality Manufacturing All Iron & Oak log splitters and other wood handling products are American made and are designed, fabricated, welded, and powder coated in-house for total quality control.
Quality Components We use the best components available so you won’t be plagued with unexpected downtime - commercial horizontal shaft engines, Haldex Barnes pumps, Prince control valves, thick-walled hydraulic cylinders with added sealing capabilities, and machined tool steel splitting wedges. All hydraulic cylinders, valves, and tanks are built to our rugged standards and pre-tested to ensure quality.
On-Going Customer Support We manufacture log splitters 12 months a year and we know the importance of providing trained personnel to promptly answer your questions. Our personnel will recommend the log splitter that’s just right for your operation, provide you with technical support on all our products, and expedite parts when and where you need them.
Engineering & Manufacturing
Quality Engineering Engineers skilled in designing steel fabricated products draft all components using the latest AutoCAD programs, then work closely with all other departments – purchasing, jigmakers, production, assembly, and inspection – to ensure strict quality guidelines are followed throughout the manufacturing process.
Fabricating Products are easily designed around the manufacturing capabilities using the most modern steel cutting and fabricating systems available to produce quality components. For example, our Cincinnati laser system is capable of producing precision parts with a .004” tolerance, handling steel plate up to ½” thick, in sizes up to 6’ x 12’.
Other Machining Centers:
CNC Punch Plasma Fabricator
CNC Press Brakes in varying sizes up to 1,000 ton capacity and bed sizes up to 14 feet.
Shears – capable of handling up to 3/8” x 12’ steel plate.
Plate Roller – up to ¼” x 10’ steel.
CNC Turret Punch – punching, coping, and plasma cutting of material up to 3/8” thick.
CNC Lathe and Milling
CNC Band Saws for bar, angle, and tube.
Welding Hydraulic welding stations are designed so each component and assembly can be positioned for ease of welding and to attain the best weld penetration. We have over 70 MIG welders are available.
Finishing All steel frames and components are thoroughly cleaned in our three-stage phosphating washer, then dried, powder coated, and finally baked in a 500 degree curing oven. The result is the best looking and finest protective finish available.
Quality Control All hydraulic cylinders, valves, and tanks are built to our rugged standards and pre-tested to ensure quality. Once the log splitters are assembled, they are crated and wrapped in a polyurethane bag keep out moisture.
To see all log splitters manufactured by Iron & Oak onlyCLICK HERE